A) Books

[1] K. Reza Kashyzadeh, “Introduction to fatigue failures in different fields of engineering”, Publisher of RUDN University, 2025

[2] K. Reza Kashyzadeh, M. Omidi Bidgoli, S. S. Rahimian Koloor, M. Petru, “Assessment of oil storage tanks performance containing cracks and cavities”, Elsevier, 2023

[3] A. Amiri Asfarjani, K. Reza Kashyzadeh, “Course and Test Master of ordinary differential equations”, Asrekankash publisher, First Edition, ISBN: 978-600-5548—57-3, 2013

[4] A. Amiri Asfarjani, K. Reza Kashyzadeh, “Collection of exam questions and answers of Master of Economic Sciences”, Asrekankash publisher, First Edition, 2013

[5] A. Amiri Asfarjani, K. Reza Kashyzadeh, “Ordinary Differential Equation”, Asrekankash publisher, First Edition, ISBN: 978-600-5548–48-8, 2012

[6] A. Amiri Asfarjani, K. Reza Kashyzadeh, “Physical scientists”, Parsa-Pajohesh publisher, First Edition, 2012

[7] A. Amiri Asfarjani, K. Reza Kashyzadeh, “Differential Equation Routines in Software (Matlab, Fortran and ….)”, Asrekankash publisher, First Edition, ISBN: 978-600-5548–57-0, 2012

 

B) International Journal Publications

2025

[1] A.Moradi, K. Reza Kashyzadeh, M. Chizari, “Finite element analysis of multiaxial fatigue and mixed-mode crack growth in Inconel 600”, International Journal of Engineering, in press, 2025.

[2] K. Reza Kashyzadeh, S. Ghorbani, A.A. Marsel Kasimovich, “Common causes of failures in the industrial bolt and nut connections”, Engineering Failure Analysis, 173, 109431, 2025.

[3] K. Reza Kashyzadeh, W. K. M. Ridha, S. Ghorbani, “The influence of Nanocoatings on the wear, corrosion, and erosion properties of AISI 404 and AISI 316L stainless steels: a critical review regarding hydro turbines”, Corrosion and Materials Degradation, 6(1), 6, 2025.

[4] M. Forouzanmehr, K. Reza Kashyzadeh, M. Laad, “Effects of ring indentation, punching, and shot peening treatments on fatigue crack retardation considering modified J-integrals: a comparative study”, Engineering Failure Analysis, 170, 109282, 2025.

 

2024

[1] A.T.W.K. Fahmi, K. Reza Kashyzadeh, S. Ghorbani, “Fault detection in the gas turbine of the Kirkuk power plant: An anomaly detection approach using DLSTM-Autoencoder”, Engineering Failure Analysis, 160(3), 108213, 2024.

2023

[2] K. Reza Kashyzadeh, K. Souri, “A short introduction of blade cooling mechanisms in old gas turbines with the aim of proper distribution of temperature profile”, Journal of Advanced Thermal Science Research, 10, 98-111, 2023.

[3] Waleed Khalid Mohammad Ridha, Kazem Reza Kashyzadeh, Siamak Ghorbani, “Influence of sediment particle size on erosion rate of AISI 304 stainless steel”, Lecturer Notes in Networks and Systems, 845, 2023.

[4] K. Reza Kashyzadeh, S. Ghorbani, M. Y. Malkova, “Application of experimental data based on Taguchi approach to optimize machining parameters of Al6061 T6 to reduce cutting forces and moments”, RUDN Journal of Engineering Research, 24(3), 279-287, 2023.

[5] A. Gursoy, A. Duman, O. Erdogan, C. Kaptan, M. Yasar, K. Reza Kashyzadeh, O. Unal, “Design and finite element analysis of S355J2 wing holders on tank wagons”, Journal of Design Against Fatigue, 1(3), 42-52, 2023.

[6] K. Reza Kashyzadeh, “Utilizing Data-Driven Methods to Predict the Fatigue Life of Cement Concrete Considering Corrosive Environmental Factors”, Journal of Design Against Fatigue, 1(3), 34-41, 2023.

[7] K. Reza Kashyzadeh, “Effect of Corrosive Environment on the High-Cycle Fatigue Behavior of Reinforced Concrete by Epoxy Resin:  Experimental Study”, Polymers, 15(19), 2023.

[8] E. Maleki, O. Unal, S.M.S. Sahebari, K. Reza Kashyzadeh, N. Amiri, “Enhancing Friction Stir Welding in Fishing Boat Construction Through Deep Learning-Based Optimization”,  Sustainable Marine Structures, 5(2), 1-14, 2023.

[9] K. Reza Kashyzadeh, M. Chizari, “Influence of Conventional Shot Peening Treatment on the Service Life Improvement of Bridge Steel Piled Subjected to Sea Wave Impact”, Journal of Marine Science and Engineering, 11(8), 2023, 1570

[10] K. Reza Kashyzadeh, M. Chizari, “Failure Analysis of Marine Structure”, Journal of Marine Science and Engineering, 11(8), 2023, 1526

[11] M. Farhadov, S. Vaskovskii, I. Brokarev, S. Ghorbani, K. Reza Kashyzadeh, “Quality Analysis of Natural Gas using the Structural Reliability of an Analytical Information System”, Mathematics, 11(14), 2023, 3238

[12] M.A. Ganjabi, G.H. Farrahi, K. Reza Kashyzadeh, N. Amiri, “Effects of various strength defects of spot weld on the connection strength under both static and cyclic loading conditions: empirical and numerical investigation”, The International Journal of Advanced Manufacturing Technology, 2023, 1-14

[13] E. Maleki, O. Unal, S.M. Seyedi Sahebari, K. Reza Kashyzadeh, “A Novel Approach for Analyzing the Effects of Almen Intensity on the Residual Stress and Hardness of Shot-Peened (TiB+TiC)/Ti-6Al-4V Composite: Deep Learning”, Materials, 16(13), 2023, 4693

[14] K. Reza Kashyzadeh, S. Ghorbani, “High-cycle fatigue behavior and chemical composition empirical relationship of low carbon three-sheet spot-welded joint: An application in automotive industry”, Journal of Design Against Fatigue, 2(1), 2023, 1-8

[15] K. Reza Kashyzadeh, A.V. Marusin, “Service Life Prediction of Type-IV Composite CNG Cylinder under the Influence of Drivers’ Refueling Habits-A numerical study”, Polymers, 15(11), 2023, 2480

[16] W. Khalid Mohammed Ridha, K. Reza Kashyzadeh, S. Ghorbani, “Common Failures in Hydraulic Kaplan Turbine Blades and Practical Solutions”, Materials, 16(9), 2023, 3303

[17] K. Reza Kashyzadeh, N. Amiri, E. Maleki, O. Unal, “A Critical Review on Improving the Fatigue Life and Corrosion Properties of Magnesium Alloys via the Technique of Adding Different Elements“, Journal of Marine Science and Engineering, 11(3), 2023, 1-28. 

[18] K. Reza Kashyzadeh, S. Ghorbani, “New neural network-based algorithm for predicting fatigue life of aluminum alloys in terms of machining parameters”, Engineering Failure Analysis, 146, 2023, 107128.

[19] M. Nouri, F. Ashenai Ghasemi, G. H.  Rahimi Sherbaf, K. Reza Kashyzadeh, “Fatigue analysis of a type-IV CNG composite cylinder with variable wall-thickness and polyethylene liner”, Mechanics of Composite Materials, 59(5), 927-944, 2023.

[20] K. Reza Kashyzadeh, “Failure Strength of Automotive Steering Knuckle Made of Metal Matrix Composite”, Applied Mechanics, 4(1), 2023, 210-229.

[21] G. H. Farrahi, A. Fallah, K. Reza Kashyzadeh, “Fracture toughness evaluation of 1.4841 bolt subjected to simultaneous effects of creep and hydrogen embrittlement phenomena using small punch test: A case study in a superheater of a petrochemical unit”, Engineering Failure Analysis, 144, 2023, 106956

[22] K. Reza Kashyzadeh, S. Ghorbani, “Comparison of some selected time-domain fatigue failure criteria dedicated for multi input random non-proportional loading conditions in industrial components‏”, Engineering Failure Analysis, 143, Part B, 2023, 106907

[23] K. Reza Kashyzadeh, G. H. Farrahi, “Improvement of HCF life of automotive safety components considering a novel design of wheel alignment based on a Hybrid multibody dynamic, finite element, and data mining techniques”, Engineering Failure Analysis, 143, Part A, 2023, 106932

2022

[24] H. Abdollahnia, M.H. Alizadeh Elizei, K. Reza Kashyzadeh, “Application of Probabilistic Approach to Investigate Influence of Details in Time History of Temperature Changes on the HCF Life of Integrated Bridge Steel Piles Installed on Water“, Journal of Marine Science and Engineering, Vol. 10, No. 12, 2022, 1802.

[25] Dmitry Gennadievich Allenov, Kristina Deinova Borisovna, Siamak Ghorbani, Kazem Reza Kashyzadeh, “Simultaneous effects of cutting depth and tool overhang on the vibration behavior of cutting tool and high-cycle fatigue behavior of product: experimental research on the turning machine”, The International Journal of Advanced Manufacturing Technology, 122, 2022, 2361-2378.

[26] Mahmood Ahmad, Ramez A Al-Mansob, Kazem Reza Kashyzadeh, Suraparb Keawsawasvong, Mohanad Muayad Sabri Sabri, Irfan Jamil, Arnold C Alguno, “Extreme Gradient Boosting Algorithm for Predicting Shear Strengths of Rockfill Materials“, Complexity, 2022, 9415863.

[27] Mahmood Ahmad, Suraparb Keawsawasvong, Mohd Rasdan Bin Ibrahim, Muhammad Waseem, Kazem Reza Kashyzadeh, Mohanad Muayad Sabri Sabri, “Novel Approach to Predicting Soil Permeability Coefficient Using Gaussian Process Regression”, Sustainability, 14(14), 2022, 8781.

[28] Moiz Tariq, Azam Khan, Asad Ullah, Bakht Zamin, Kazem Reza Kashyzadeh, Mahmood Ahmad, “Gene Expression Programming for Estimating Shear Strength of RC Squat Wall”, Buildings, 12(7), 2022, 918.

[29] K. Reza Kashyzadeh, G. H. Farrahi, A. Ahmadi, M. Minaei, M. Ostad Rahimi, S. Barforoushan, “Fatigue life analysis in the residual stress field due to resistance spot welding process considering different sheet thicknesses and dissimilar electrode geometry”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022, 14644207221101069.

[30] Kazem Reza Kashyzadeh, Kambiz Souri, Abdolhossein Gharehsheikh Bayat, Reza Safavi Jabalbarez, Mahmood Ahmad, “Fatigue Life Analysis of Automotive Cast Iron Knuckle under Constant and Variable Amplitude Loading Conditions”, Applied Mechanics, 3(2), 2022, 517-532.

[31] Kazem Reza Kashyzadeh, Nima Amiri, Siamak Ghorbani, Kambiz Souri, “Prediction of Concrete Compressive Strength Using a Back-Propagation Neural Network Optimized by a Genetic Algorithm and Response Surface Analysis Considering the Appearance of Aggregates and Curing Conditions”, Buildings, 12(4), 2022, 438.

[32] A.T. Watban Khalid Fahmi, K. Reza Kashyzadeh, S. Ghorbani, “A comprehensive review on mechanical failures cause vibration in the gas turbine of combined cycle power plants“, Engineering Failure Analysis, Vol. 134, 2022.

[33] K. Reza Kashyzadeh, G.H. Farrahi, M. Minaei, R. Masajedi, M. Gholamnia, M. Shademani, “Numerical study of shunting effect in three-steel sheets resistance spot welding“, International Journal of Engineering, Transactions B: Applications, 35 (2), 2022.

[34] E. Maleki, O. Unal, S.M. Seyedi Sahebari, K. Reza Kashyzadeh, I. Danilov, “Application of Deep Neural Network to Predict the High-Cycle Fatigue Life of AISI 1045 Steel Coated by Industrial Coatings“, Journal of Marine Science and Engineering, 10 (2), 2022.

[35] F. Kiarasi, M. Babaei, M. Omidi Bidgoli, K. Reza Kashyzadeh, K. Asemi, “Mechanical characterization and creep strengthening of AZ91 magnesium alloy by addition of yttrium oxide nanoparticles“, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.

[36] H. Hasanzadeh, E. Mohtarami, M. Ebadati, K. Reza Kashyzadeh, M. Omidi Bidgoli, “Collapse analysis of Al 6061 alloy conical shells with circular cutouts under axial loading: experiment and simulation”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022.

[37] B. Kogo, C. Xu, B. Wang, M. Chizari, K. Reza Kashyzadeh, S. Ghorbani, “An Experimental Analysis to Determine the Load-Bearing Capacity of 3D Printed Metals‏”, Materials, 15(12), 2022, 750.

[38] M. Forouzanmehr, K. Reza Kashyzadeh, A. Borjali, A. Ivanov, M. Jafarnode, T.H. Gan, B. Wang, M. Chizari, “Detection and Analysis of Corrosion and Contact Resistance Faults of TiN and CrN Coatings on 410 Stainless Steel as Bipolar Plates in PEM Fuel Cells”, Sensors, 22(3), 2022.

[39] K. Reza Kashyzadeh, N. Amiri, “Experimental Study of the Effect of Vehicle Velocity on the Ride Comfort of a Car on a Road with Different Types of Roughness”, Recent Trends in Mechatronics Towards Industry 4.0, 2022.

2021

[40] H. Abdollahnia, M.H. Alizadeh Elizei, K. Reza Kashyzadeh, “Multiaxial Fatigue Life Assessment of Integral Concrete Bridge with a Real-Scale and Complicated Geometry Due to the Simultaneous Effects of Temperature Variations and Sea waves clash”, ‏Journal of Marine Science and Engineering, 9 (12), 2021

[41] N. Amiri, M. Shaterabadi, K. Reza Kashyzadeh, M. Chizari, “A Comprehensive Review on Design, Monitoring, and Failure in Fixed Offshore Platforms”‏, Journal of Marine Science and Engineering, 9 (12), 2021

[42] M. Nouri Kamary, F. Ashenai Ghasemi, G.H. Rahimi Sherbaf, K. Reza Kashyzadeh, “Numerical simulation of CNG fuel tank behavior made of epoxy/glass composite in design mode considering constant and variable thicknesses under burst pressure test”, Iranian Journal of Manufacturing Engineering, 8(7), 2021, pp. 20-30 (In Persian)

[43] E. Maleki, O. Unal, K. Reza Kashyzadeh, “Influences of shot peening parameters on mechanical properties and fatigue behavior of 316 L steel: Experimental, Taguchi method, and Response surface methodology”, Metals and Materials International, 27(11), 2021

[44] E. Maleki, G. H. Farrahi, K. Reza Kashyzadeh, O. Unal, M. Gugaliano, S. Bagherifard, “Effects of Conventional and Severe Shot Peening on Residual Stress and Fatigue Strength of Steel AISI 1060 and Residual Stress Relaxation Due to Fatigue Loading: Experimental and Numerical Simulation“, Metals and Materials International, 27(8) 2021

[45] K. Reza Kashyzadeh, A Habibi Darounkola‏, “Application of Taguchi Approach to Forecast the Wages of Persian Silk Carpet Weavers‏”, International Journal of Engineering and Management Research, 11 (3), 2021, pp. 67-72‏

[46] E. Maleki, O. Unal, K. Reza Kashyzadeh, M. Guagliano, S. Bagherifard, “A systematic study on the effects of shot peening on a mild carbon steel: Microstructure, mechanical properties, and axial fatigue strength of smooth and notched specimens‏”, Applied Surface Science Advances, 4, 2021, 100071

[47] M. Pahlavani, J. Marzbanrad, K. Reza Kashyzadeh‏, “Effect of annealing temperature and cutting angle of specimens on metallurgical and mechanical properties of Mg-7Li-1Zn alloy via Taguchi approach and response surface analysis‏”, IOP Conf. Series: Materials Science and Engineering, 1126 (1), 2021

[48] A. Dmitry Gennadievich, S. Ghorbani, K. Reza Kashyzadeh, “Analyzing the bearing wear using direct spectrum method when transferring the torque motion from the machine”, IOP Conference Series Materials Science and Engineering, 1092(1), 2021

[49] K. Reza Kashyzadeh, M. Omidi Bidgoli, S. S. Rahimian Koloor, M. Petru, A. Amiri Asfarjani, “An optimum fatigue design of polymer composite CNG tank using hybrid finite element-response surface methods”, Polymers, 13(4), 2021

[50] S. M. Saleh Mousavi-Bafrouyi, K. Reza Kashyzadeh, S. M. Khorsandijou, “Effects of road roughness, aerodynamics, and weather conditions on automotive wheel force”, International Journal of Engineering, IJE Transaction B: Applications, 34(2), 2021, 536-546

[51] A. Terentyev, M. Karelina, V. Egorov, A. Andreev, K.R. Kashyzadeh, “Model for determining optimal routes in complex transport systems‏”‏, Transportation Research Procedia, 57, 2021, pp. 679-687‏

[52] M. Forouzanmehr, K.R. Kashyzadeh, A. Borjali, M. Jafarnode, M. Chizari, “Effects of CrN/TiN coatings on interfacial contact resistance of stainless steel 410 bipolar plates in fuel cells‏”‏, Energy and Sustainable Futures: Proceedings of 2nd ICESF 2020, 133‏ 2021

[53] H. Abdollahnia, M.H. Alizadeh Elizei, K.R. Kashyzadeh‏, “Low-cycle fatigue behavior of H-shaped steel piles of an integral concrete bridge subjected to temperature variations‏”, Materials Today: Proceedings, 46, 2021, pp. 1657-1662

[54] K.R. Kashyzadeh, M. Pahlavani, J. Marzbanrad, “High-temperature tensile behavior and high-cycle fatigue properties of Mg-7Li-1Zn alloy‏”‏, Materials Today: Proceedings, 46, 2021, pp. 1693-1698

 2020

[55] K.R. Kashyzadeh, S. Ghorbani‏, “Numerical study of free vibration behavior of filled tool holder using epoxy-granite‏”, Journal of Physics: Conference Series, 1687 (1), 2020, p. 012025‏

[56] K. Souri, K.R. Kashyzadeh, A.S. Naghdali, M. Mesbah‏, “Performance of a single effect absorbing chiller lithium bromide-water coupled to a solar collector‏”, Journal of Physics: Conference Series, 1687 (1), 2020, p. 012026‏

[57] Z. Sarparast, R. Abdoli, A. Rahbari, M. Varmazyar, K. Reza Kashyzadeh, “Experimental and Numerical Analysis of Permeability in Porous Media”, International Journal of Engineering (IJE) TRANSACTION B: Applications, 2020, 33(11), 2408-2415

[58] H. Abdollahnia, M. Alizadeh Elizei, k. Reza Kashyzadeh, “Fatigue Life Assessment of Integral Concrete Bridges with H Cross-Section Steel Piles Mounted in Water”. Journal of Failure Analysis and Prevention, 2020, 20(5), 1661-1672‏

[59] M. Omidi Bidgoli, K. Reza Kashyzadeh, S. S. Rahimian Koloor, M. Petru, “Estimation of Critical Dimensions for the Crack and Pitting Corrosion Defects in the Oil Storage Tank Using Finite Element Method and Taguchi Approach”, Metals, 2020, 10(10), 1372

[60] K. Reza Kashyzadeh, S. Ghorbani, M. Forouzanmehr, “Effects of Drying Temperature and Aggregate Shape on the Concrete Compressive Strength: Experiments and Data Mining Techniques”, International Journal of Engineering, 33(9), 2020, pp. 1780-1791

[61] G. H. Farrahi, A. Ahmadi, K. Reza Kashyzadeh, “Simulation of vehicle body spot weld failures due to fatigue by considering road roughness and vehicle velocity“, Simulation Modelling Practice and Theory, 2020, p. 102168

[62] S. Ghorbani, S. Ghorbani, K. Reza Kashyzadeh, “Taguchi Approach and Response Surface Analysis for Design of a High-performance Single-walled Carbon Nanotube Bundle Interconnects in a Full Adder”, International Journal of Engineering, 33(8), 2020, pp. 1598-1607

[63] M. Nouri, F. Ashenai Ghasemi, Gh. Rahimi Sherbaf, K. R. Kashyzadeh, “Experimental and numerical study of the static performance of a hoop-wrapped CNG composite cylinder considering variable wall-thickness and polymer liner”, Mechanics of Composite Materials, 56(3), 2020, pp. 339-352

[64] N. Amiri, G. H. Farrahi, K. Reza Kashyzadeh, M. Chizari, “Applications of ultrasonic testing and machine learning methods to predict the static & fatigue behavior of spot-welded joints”, Journal of Manufacturing Process, Vol. 52, 2020, pp. 26-34

[65] K. Reza Kashyzadeh, “A new algorithm for fatigue life assessment of automotive safety components based on the probabilistic approach: the case of the steering knuckle”, Engineering Science and Technology, an International Journal, 23(2), 2020, pp. 392-404

[66] K. Reza Kashyzadeh, “Effects of axial and multi-axial variable amplitude loading conditions on the fatigue life assessment of automotive steering knuckle”, Journal of Failure Analysis and Prevention, 20, 2020, pp. 455-463

[67] M. Omidi Bidgoli, K.R. Kashyzadeh, S.S. Rahimian Koloor, M. Petrů, N. Amiri, “Optimum Design of Sunken Reinforced Enclosures under Buckling Condition‏”‏, Applied Sciences, 10 (23), 2020, p. 8449‏

[68] A. Ahmadi, G. H. Farrahi, K. Reza Kashyzadeh, Sh. Azadi, K. Jahani, “A comparative study on the fatigue life of the vehicle body spot welds using different numerical techniques: Inertia relief and Modal dynamic analyses”, Frattura ed Integrità Strutturale, Vol. 52, 2020, pp. 67-81

[69] G. H. Farrahi, K. Reza Kashyzadeh, M. Minaei, A. Sharifpour, S. Riazi, “Analysis of resistance spot welding process parameters effect on the weld quality of three-steel sheets used in automotive industry: Experimental and Finite element simulation”, International Journal of Engineering (JJE), IJE TRANSACTIONS A: Basics, 33(1), 2020, pp. 148-157

 2019

[70] E. Maleki, O. Unal, K. Reza Kashyzadeh, “Surface layer nanocrystallization of carbon steels subjected to severe shot peening: Analysis and optimization”, Materials Characterization, Vol. 157, 2019

[71] E. Maleki, O. Unal, K. Reza Kashyzadeh, “Efficiency Analysis of Shot Peening Parameters on Variations of Hardness, Grain Size and Residual Stress via Taguchi Approach”, Metals and Materials International, 25(6), 2019, pp. 1436-1447

[72] E. Maleki, K. Reza Kashyzadeh, “Parametric analysis of collapse load factor of planar frames”, SN Applied Science, Vol. 1, 2019

[73] E. Maleki, K. Reza Kashyzadeh, N. Amiri, “Numerical study of the behavior of air flow versus circular, rectangular, and elliptical cross-sections in two stationary and rotational states”, Advances and Applications in Fluid Mechanics, 22(2), 2019, pp. 191-204

[74] M. Forouzanmehr, K. Reza Kashyzadeh, K. Baziari, M. Mohammadi, “Failure analysis of reinforced concrete beams in bending strengthened with CFRP by using finite element method and experimental tests”, International Journal of Solid Materials, 1(1), 2019, pp. 27-49

 2018

[75] E. Maleki, O. Unal, K. Reza Kashyzadeh, “Fatigue behavior prediction and analysis of shot peened mild carbon steels”, International Journal of Fatigue, Vol. 116, 2018, pp. 48-67

[76] G.H. Farrahi, M. Chamani, K. Reza Kashyzadeh, A. Mostafazade Abolmaali, A.H. Mahmoudi, H. Afshin, “Failure analysis of bolt connections in fired heater of a petrochemical unit”, Engineering Failure Analysis, Vol. 92, 2018, pp. 327-342

[77] E. Maleki, O. Unal, K. Reza Kashyzadeh, “Effects of conventional, severe, over, and re-shot peening processes on the fatigue behavior of mild carbon steel”, Surface and Coatings Technology, Vol. 344, 2018, pp. 62-74

[78] K. Reza Kashyzadeh, G. H. Farrahi, M. Shariyat, M. T. Ahmadian, “Experimental accuracy assessment of various high-cycle fatigue criteria for a critical component with complicated geometry and multi-input random non- proportional 3D stress components”, Engineering Failure Analysis, Vol. 90, 2018, pp. 534-553

[79] K. Reza Kashyzadeh, G. H. Farrahi, M. Shariyat, M. T. Ahmadian, “The role of wheel alignment over the fatigue damage accumulation in vehicle steering knuckle”, Journal of Stress Analysis, (3)1, 2018, pp. 21-33

 2017

[80] K. Reza Kashyzadeh, G. H. Farrahi, M. Shariyat, M. T. Ahmadian, “Experimental and finite element studies on free vibration of automotive steering knuckle”, International Journal of Engineering, Vol. 30, Issue. 11, 2017, pp. 1776-1783

[81] K. Reza Kashyzadeh, E. Maleki, “Experimental investigation and artificial neural network modelling of warm- galvanization and hardened chromium coatings thickness effects on the fatigue life of AISI 1045 carbon steel”, Journal of Failure Analysis and Prevention, Vol. 17, Issue. 6, 2017

[82] E. Maleki, K. Reza Kashyzadeh, “Hardened Nickel Coating Effects on the Fatigue Behavior of CK45 steel: Experimental, Finite Element Method and Artificial Neural Network Modeling”, Iranian Journal of Materials Science and Engineering, Vol. 14, No. 4, 2017, pp. 81-99

[83] K. Reza Kashyzadeh, S. Alipanah Kivi, M. Rynkovskaya, “Fatigue life assessment of unidirectional fibrous composite centrifugal compressor impeller blades based on FEA”, International Journal of Emerging Technology and Advanced Engineering, Vol. 7, Issue. 5, 2017, pp. 6-11

2016

[84] K. Reza Kashyzadeh, A. Amiri Asfarjani, “Finite element study on vibration of functionally graded beam with different temperature conditions”, Advances in Materials, Vol. 5, Issue. 6, 2016, pp. 57-65

[85] K. Reza Kashyzadeh, “Mass reduction for arm suspension by using optimal design parameters”, International Journal of vehicle systems modelling and testing, Vol. 11, Issue. 4, 2016, pp.271-284

[86] A. Esfandi, S. M. Ataei Ardestani, H. Ghafori Varzaneh, K. Reza Kashyzadeh, “Calculation of vehicle’s mass transfer due to road roughness in accelerating and braking maneuvers”, Journal of Mechanical Engineering and Vibration, Published

[87] K. Reza Kashyzadeh, S. M. S. Mousavi Bafrouyi, S. Arab, “Study of the vibration behavior of vehicle body due to road roughness during accelerating motion”, Journal of Mechanical Engineering and Vibration, Published

 2015

[88] K. Reza Kashyzadeh, S. Alipanah Kivi, “Study of the effect of temperature on the vibration behavior of automotive cover clutch”, Journal of Mechanical Engineering and Vibration, Vol. 6, Issue. 1, 2015

[89] K. Reza Kashyzadeh, “Fatigue life estimation under multi-axial loading in light poles”, Ciencia e Natura, 37(1), 2015

[90] K. Reza Kashyzadeh, S. Alipanah Kivi, H. R. Khodami, ‘Investigating Vibration Behavior of Cover Clutch of Passenger Automobiles’, International Journal of Scientific Research in Science, Engineering and Technology, Vol. 3, 2015

[91] K. Reza Kashyzadeh, A. Arghavan, M. J. Ostad-Ahmad-Ghorabi, ‘Fatigue Life Prediction of Suspension Automotive under Random Vibration Based Road Roughness’, Mediterranean Journal of Modeling and Simulation, Vol. 4, Issue.1, 2015

[92] K. Reza Kashyzadeh, A. Arghavan, “Formulate Number Cycle of Fracture by the thickness of the warm galvanizing coating on the fatigue”, Journal of Mechanical Engineering and Vibration, Vol. 6, Issue. 2, 2015

 2014

[93] K. Reza Kashyzadeh, M. J. Ostad-Ahmad-Ghorabi, A. Arghavan, ‘Investigating the Effect of Road Roughness on Automotive Component’, Engineering Failure Analysis, Vol. 41, 2014

[94] K. Reza Kashyzadeh, A. Arghavan, M. J. Ostad-Ahmad-Ghorabi, ‘Fatigue Life Prediction of Suspension’s Pitman Arm Under Random Vibration Based Road Roughness’, Sylwan Journal, Vol. 158, Issue. 5, 2014

[95] K. Reza Kashyzadeh, K. Ghaemi osgouie, Alireza Amiri Asfarjani, ‘Dynamic response of a flexible cantilever beam under moving decentralized mass with constant speed’, Journal of Materials Science and Engineering with Advanced Technology, Vol. 10, Issue .1, 2014

[96] H. R. Khodami, A. Arghavan, K. Reza Kashyzadeh, ‘Improvement of stiffness coefficient of a passenger car pre damper clutch spring by utilizing multi body dynamic method’, International Journal of Emerging Technology and Advanced Engineering, Vol. 4, Issue. 7, 2014

[97] K. Reza Kashyzadeh, A. Amiri Asfarjani, “Study of the crack closure methods and repair it”, Journal of Mechanical Engineering and Vibration, Vol. 5, Issue. 4, 2014

 2013

[98] K. Reza Kashyzadeh, A. Arghavan, ‘Study of the Effect of Different Industrial Coating with Micro-scale Thickness on the CK45 Steel by Experimental and Finite Element Methods’, Strength of Materials, Vol. 45, Issue. 6, 2013

[99] K. Reza Kashyzadeh, M. J. Ostad-Ahmad-Ghorabi, A. Arghavan, ‘Fatigue Prediction on Wheel’s Hub Under Random Vibration Based Road Roughness’, Journal of Mechanical Engineering and Vibration, Vol. 2, Issue. 1, 2013

[100] K. Reza Kashyzadeh, M. J. Ostad-Ahmad-Ghorabi, A. Arghavan, ‘Study Effects of Vehicle Velocity on A Road Surface Roughness Simulation’, Applied Mechanics and Materials, Vol. 372, 2013

[101] K. Reza Kashyzadeh, M. J. Ostad-Ahmad-Ghorabi, A. Arghavan, ‘Airstrip Roughness Simulation to Dynamic and Vibration Analysis for Take off and Land on’, International Journal of Engineering Science and Technology, Vol. 3, Issue. 2, 2013

[102] K. Reza Kashyzadeh, S. Dolati, A. Amiri Asfarjani, ‘Fatigue Prediction of Unidirectional Composite Materials with Different Fiber Angles’, international journal of Engineering Science and Technology, Vol. 3, Issue. 2, 2013

[103] K. Reza Kashyzadeh, “Path estimation of crack growth under multi-axial loading in a plate with center rectangular notch”, Journal of Mechanical Engineering and Vibration, Vol. 4, Issue. 1, 2013

 2012

[104] H. R. Khodami, A. Arghavan, K. Reza Kashyzadeh, “Study of the effect of inertia of gearbox’s shaft on the initial working vibration of a passenger car by utilizing multi body dynamic method”, Journal of Mechanical Engineering and Vibration, Vol. 3, Issue. 2, 2012

[105] S. Dolati, A. Fereidoon, K. Reza Kashyzadeh, ‘A Comparison Study between Boron nitride nanotubes and Carbon nanotubes’, International Journal of Emerging Technology and Advanced Engineering, Vol. 2, Issue. 10, 2012

[106] K. Reza Kashyzadeh, N. Aghili Kesheh, ‘Study type of cracks in construction and its controlling’, International Journal of Emerging Technology and Advanced Engineering, Vol. 2, Issue. 8, 2012

[107] M. J. Ostad-Ahmad-Ghorabi, A. Arghavan, K. Reza Kashyzadeh, ‘Investigation Effect of Velocity on the Transfer Function Values under Road Roughness’, International Journal of Emerging Technology and Advanced Engineering, Vol. 2, Issue. 5, 2012

[108] K. Reza Kashyzadeh, M. J. Ostad-Ahmad-Ghorabi, ‘Study of Chatter Analysis in Turning Tool and Control Methods – A Review’, International Journal of Emerging Technology and Advanced Engineering, Vol. 2, Issue. 4, 2012

[109] K. Reza Kashyzadeh, S. Dolati, ‘Investigation of Mechanical Properties of Unidirectional Fibrous Composite by Micro-Mechanics Model’, Advanced Materials Research, Vol. 487, 2012

[110] M. J. Ostad-Ahmad-Ghorabi, K. Reza Kashyzadeh, ‘Study Effect of Deflection on the Progress of Cracking in Aluminum with Different Heat Treatment’, Advanced Materials Research, Vol. 472-475, 2012

[111] A. Hosseinzadeh, K. Hossein-pour, K. Reza Kashyzadeh, A. Amiri Asfarjani, ‘Numerical investigation of the influence of friction, module and Number of teeth in forging process of a spur gear’, Advanced Materials Research, Vol. 472-475, 2012

 2011

[112] M. J. Ostad-Ahmad-Ghorabi, K. Reza Kashyzadeh, S. Dolati, S. M. Saadatmand, ‘Investigating the Effect of Deflection on the Progress of Cracking in Steel and Aluminum Sheets’, International Journal of Civil Engineering and Building Materials, Vol. 1, Issue. 2, 2011

[113] A. Amiri Asfarjani, S. Adibnazari, K. Reza Kashyzadeh, ‘Experimental and Finite Element Analysis Approach for Fatigue of Unidirectional Fibrous Composites’, Applied Mechanics and Materials, Vol. 87, 2011

[114] A. Arghavan, K. Reza Kashyzadeh, A. Amiri Asfarjani, ‘Investigating Effect of Industrial Coatings on Fatigue Damage’, Applied Mechanics and Materials, Vol. 87, 2011

 

C) Conference Proceedings

[1] A. Said, S. Ghorbani, K. Reza Kashyzadeh, “Tensile properties estimation of 3D printed polylactic acid samples via process parameters using data-driven methods”, VII International Conference on Information Technologies in Engineering Education (Inforino 2024), National Research University (Moscow Power Engineering Institute), Moscow, Russia, 16-19 April 2024, IEEE.

[2] K. Reza Kashyzadeh, “Detection of spot-welded connection defects in the automotive body production line“, Scientific and practical international conference “Ground transport technologies”, RUDN University, Moscow, Russia, 17 October 2023.

[3] A. Dragunov Gleb, K. Reza Kashyzadeh, S. Ghorbani, “Potential causes of steering knuckle failure“,  Scientific and practical international conference “Ground transport technologies”, RUDN University, Moscow, Russia, 17 October 2023.

[4] B. Negewo Getu, K. Reza Kashyzadeh, S. Ghorbani, “Common problems in the production of an industrial part by sand casting“, Scientific and practical international conference “Ground transport technologies”, RUDN University, Moscow, Russia, 17 October 2023.

[5] Waleed Khalid Mohammad Ridha, Kazem Reza Kashyzadeh, Siamak Ghorbani, “Experimental study of the erosion behavior of 304 stainless steel under solid–liquid jet flow impinging at different impact angles”, International Research Conference on Engineering and Applied Sciences (IRCEAS 2023), Baghdad, Iraq, 16-17 October 2023.

[6] Waleed Khalid Mohammad Ridha, Kazem Reza Kashyzadeh, Siamak Ghorbani, “Influence of sediment particle size on erosion rate of AISI 304 stainless steel”, International Conference on Intelligent Manufacturing and Robotics (ICiMR 2023), Suzhou, Jiangsu, China, 22-23 August 2023. 

 [7] W. Khalid Mohammed Ridha, K. Reza Kashyzadeh, S. Ghorbani, “Failure analysis of a Kaplan turbine blade in Iraq’s Haditha hydropower plant: A case study”, Engineering Systems-2023, 2023, Moscow, Russia, 5-7 April 2023

[8] V.V. Polunin, S. Ghorbani, K. Reza Kashyzadeh, “Effective parameters of shot peening treatment on improving the durability of industrial products made of metallic materials”, Engineering Systems-2023, 2023, Moscow, Russia, 5-7 April 2023

[9] W. Khalid Mohammed Ridha, K. Reza Kashyzadeh, S. Ghorbani, “Technical solution to decrease cavitation effects in the Kaplan turbine blade”, Engineering Systems-2023, 2023, Moscow, Russia, 5-7 April 2023

[10] M.K. Al-Adarbi, S. Ghorbani, K. Reza Kashyzadeh, “Investigating the effect of bolt manufacturing methods on its efficiency”, Engineering Systems-2023, 2023, Moscow, Russia, 5-7 April 2023

[11] K. Reza Kashyzadeh, S. Ghorbani, M. Malkova, “Application of Taguchi approach-based experimental data to optimize machining parameters of Al6061-T6 with the aim to reduce cutting forces and moments”, Engineering Systems-2023, 2023, Moscow, Russia, 5-7 April 2023

[12] A.S. Averyanov, S. Ghorbani, K. Reza Kashyzadeh, “Industrial techniques of corrosion prevention in aluminum alloys”, Engineering Systems-2023, 2023, Moscow, Russia, 5-7 April 2023

[13] W.K. Fahmi Al-Tekreeti , K. Reza Kashyzadeh, S. Ghorbani, “Industrial vibration detection techniques for enhanced monitoring and maintenance of combined cycle power plants”, Engineering Systems-2023, 2023, Moscow, Russia, 5-7 April 2023

[14] R.S. Mirshafa, A. Shamsizadehhayatdavoodi, A. Saeidi Naibin, K. Reza Kashyzadeh, “An interdisciplinary medical-technology-engineering preliminary research with the aim of technical development of radiotherapy in the treatment of various types of cancers”, Engineering Systems-2023, 2023, Moscow, Russia, 5-7 April 2023

[15] M. Pahlavani, J. Marzbanrad, K. Reza Kashyzadeh, “Effect of annealing temperature and cutting angle of specimens on metallurgical and mechanical properties of Mg-7Li-1Zn alloy via Taguchi approach and response surface analysis”, 3rd International Conference on Trends in Material Science and Inventive Materials, ICTMIM 2021, India, 12-13 March 2021
[16] G. A. Dmitry, S. Ghorbani, K. Reza Kashyzadeh, “Analyzing the bearing wear using direct spectrum method when transferring the torque motion from the machine”, 2nd International Conference on Innovative Technology, Engineering and Sciences, December 2020, Universiti Malaysia Pahang, Malaysia
[17] K. Reza Kashyzadeh, S. Ghorbani, “Numerical study of free vibration behaviour of filled tool holder using epoxy-granite”, International Conference on Engineering Systems 2020 (ICES 2020), October 2020, RUDN University, Moscow, Russia
[18] k. Souri, K. Reza Kashyzadeh, A. S. Naghdali, M. Mesbah, “Investigating the performance of a single effect absorbing chiller lithium bromide-water coupled to a solar collector”, International Conference on Engineering Systems 2020 (ICES 2020), October 2020, RUDN University, Moscow, Russia
[19] K. Reza Kashyzadeh, M. Pahlavani, J. Marzbanrad, “High-temperature tensile behavior and high-cycle fatigue properties of Mg-7Li-1Zn alloy”, the Innovative Manufacturing, Mechatronics & Materials Forum (IM3F-2020), August 2020, Universiti Malaysia Pahang, Malaysia
[20] H. Abdollahnia, M. H. Alizadeh Elizei, K. Reza Kashyzadeh, “Low-cycle fatigue behavior of H-shaped steel piles of an integral concrete bridge subjected to temperature variations”, the Innovative Manufacturing, Mechatronics & Materials Forum (IM3F-2020), August 2020, Universiti Malaysia Pahang, Malaysia
[21] K. Reza Kashyzadeh, N. Amiri, “Experimental study of the effect of vehicle velocity on the ride comfort of a car on a road with different types of roughness”, the Innovative Manufacturing, Mechatronics & Materials Forum (IM3F-2020), August 2020, Universiti Malaysia Pahang, Malaysia
[22] M. Forouzanmehr, M. Zamani, E. Khosravian, K. Reza Kashyzadeh, A. Ivanov, “Experimental study on the fatigue behavior of conventional and severe shot peened molybdenum alloy steel”, The Biennial International Conference on Experimental Solid Mechanics, 18-19 February 2020, Iran University of Science and Technology, Tehran, Iran.
[23] N. Amiri, G. H. Farrahi, K. Reza Kashyzadeh, M. Ostad Raimi, S. Barforoushan, “Reliability Study of Non-Destructive Inspections of Resistance Spot Welds in the Automotive Industry”, the 5th International and 16th National Conference on Manufacturing Engineering, ICME 2019, 18-19 December, Tarbiat Modarres University, Tehran, Iran.
[24] K. Reza Kashyzadeh, G.H. Farrahi, M. Shariyat, M.T. Ahmadian, “Experimental and probabilistic approach for assessing fatigue life of automotive steering knuckle”, the 26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME-2018), 24-26 April 2018, School of Mechanical Engineering, Semnan University, Semnan, Iran.
[25] M. Minaei, K. Reza Kashyzadeh, G.H. Farrahi, “The Gap effect on quality of spot welding”, 18th national conference of welding and inspection (18th NCWI), Iranian Society of Welding and NDT, Arak, 6-7 February 2018.
[26] K. Reza Kashyzadeh, S. Alipanah Kivi, M. Pahlavani, M. Ahmadi, “Investigation of the weakness points of elevator cabin structure due to vibration loading and present a proper solution to strength it”, 1st Iran Congress in Industrial Applications of Advanced Materials and Manufacturing, Iran University of Science & Technology, Iran, Tehran, 2017
[27] M. Ahmadi, M. Pahlavani, K. Reza Kashyzadeh, M. Ahmadi, J. Marzban Rad, “Investigation the effect of friction stir welding parameters on mechanical properties of Al6061”, 1st Iran Congress in Industrial Applications of Advanced Materials and Manufacturing, Iran University of Science & Technology, Iran, Tehran, 2017
[28] K. Reza Kashyzadeh, G. H. Farrahi, M. Shariyat, M. T. Ahmadian, “Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle”, 2nd International Congress on Technology, Engineering and Science, Malaysia, 2016
[29] S. M. S. Mousavi Bafrouyi, K. Reza Kashyzadeh, S. M. Khorsandijou, “Study of the Effect of Weather Conditions and Road Roughness on the Wheel Forces of Vehicle”, 2nd International Congress on Technology, Engineering and Science, Malaysia, 2016
[30] K. Reza Kashyzadeh, S. M. S. Mousavi Bafrouyi, “Numerical Study on Vibrational Behavior of Vehicle Body Due to Road Roughness and Acceleration Maneuver”, 2nd International Congress on Technology, Engineering and Science, Malaysia, 2016
[31] K. Reza Kashyzadeh, A. Amiri Asfarjani, “Finite Element Study on the Vibration of Functionally Graded Beam with Different Temperature Conditions”, 2nd International Congress on Technology, Engineering and Science, Malaysia, 2016
[32] K. Reza Kashyzadeh, A. Amiri Asfarjani, “Layer Thickness Optimization of Symmetric Laminated Carbon/epoxy Composites Under Fatigue Life Constraint”, 2nd International Congress on Technology, Engineering and Science, Malaysia, 2016
[33] M. J. Ostad-Ahmad-Ghorabi, A. Arghavan, K. Reza Kashyzadeh, ‘Study effect of tire adhesion with road roughness on the dynamics behavior of vehicle suspension’, First National Congress of Industrial Cluster of Auto Parts, Islamic Azad University, Semnan branch, Iran, 2012
[34] K. reza Kashyzadeh, M. J. Ostad-Ahmad-Ghorabi, ‘Calculation of Fatigue endurance limit of fuel valve of vehicle based on experimental method’, The First Regional Conference on the Automotive Engineering, Islamic Azad University, Ahvaz branch, Ahvaz, Iran, 2012
[35] K. reza Kashyzadeh, M. J. Ostad-Ahmad-Ghorabi, ‘Study on the Effect of Deflection on the Progress of Cracking in Aluminum plate’, The First Regional Conference on the Automotive Engineering, Islamic Azad University, Ahvaz branch, Ahvaz, Iran, 2012
[36] K. reza Kashyzadeh, M. Rajabpour, ‘Prediction of fatigue damage on the galvanized coating in the micro- scale’, The First Annual Conference on Mechanical Engineering, Islamic Azad University, Marv-Dasht Branch, Shiraz, Iran, 2012
[37] K. reza Kashyzadeh, A. Arghavan, ‘Provide a formula to calculate the number of cycles to fatigue failure in terms of thickness of hardened nickel plated’, The First Annual Conference on Mechanical Engineering, Islamic Azad University, Marv-Dasht Branch, Shiraz, Iran, 2012
[38] K. reza Kashyzadeh, M. J. Ostad-Ahmad-Ghorabi, ‘Report a new model to calculate the fatigue endurance limit based on stepwise method and test data’, The First Annual Conference on Mechanical Engineering, Islamic Azad University, Marv-Dasht Branch, Shiraz, Iran, 2012
[39] K. reza Kashyzadeh, A. Arghavan, ‘Produce a new formula to calculate the number of cycles to fatigue failure in terms of thickness of decorative chromium plated’, The First Annual Conference on Mechanical Engineering, Islamic Azad University, Abhar Branch, Zanjan, Iran, 2012
[40] A. Fereidoon, K. Reza Kashyzadeh, S. Dolati, A. Amiri Asfarjani, ‘Investigating Vibration Behavior of Single-Walled Carbon Nano-tubes Using Finite Element Method’, Polymer Processing Society, PPS 2011 Asia/Australia Regional Meeting, 2011
[41] A. Fereidoon, K. Reza Kashyzadeh, S. Dolati, ‘Vibration Analysis Double-Walled Carbon Nano-tubes Using Beam Element’, Polymer Processing Scoiety, PPS 2011 Asia/Australia Regional Meeting, 2011
[42] A. Amiri Asfarjani, S. Adibnazari, K. Reza Kashyzadeh, ‘S-N Curve of Unidirectional Fibrous Composite with Different Stress Ratio in Aerospace Structures’, The First Iranian Aircraft Structural Integrity Program Conference, Sharif University of Technology, Tehran-Iran, 2011
[43] A. Amiri Asfarjani, S. Adibnazari, K. Reza Kashyzadeh, ‘Finite element Analysis Approach for Fatigue of Unidirectional Fibrous Composites’, The First Iranian Aircraft Structural Integrity Program Conference, Sharif University of Technology, Tehran-Iran, 2011
[44] M. Rajabpour, K. reza Kashyzadeh, ‘Investigating effect of ballast inflexibility on the railway stresses’, The First Annual Conference on Mechanical Engineering, Islamic Azad University, Abhar Branch, Zanjan, Iran, 2011
[45] K. reza Kashyzadeh, A. Arghavan, A. Amiri Asfarjani, J. Eskandari-Jam, ‘Investigate the effect of thickness of Hardened chromium coating on the fatigue endurance limit’, International Congress on Aerospace Engineering, Tarbiat Modares University, Tehran, Iran, 2011
[46] K. reza Kashyzadeh, A. Arghavan, A. Amiri Asfarjani, ‘Experimental and numerical study on the effect of thickness of Hardened Nickel coating on the fatigue life of steel CK45’, The First National Conference on the new and recent Technology in the field of Mechanical Engineering, Islamic Azad University, Shiraz branch, Shiraz, Iran, 2011
[47] K. reza Kashyzadeh, A. Arghavan, A. Amiri Asfarjani, ‘Study the effect of thickness of Decorative Chrome coating on the fatigue life of metals’, The First Regional Conference on the Mechanical Engineering, Islamic Azad University, Tehran branch, Tehran, Iran, 2011
[48] A. Amiri Asfarjani, S. Adibnazari, J. Eskandari-Jam, K. reza Kashyzadeh, ‘Investigation of fatigue damage caused variable loading on the life of unidirectional composite materials’, The First Regional Conference on the Mechanical Engineering, Islamic Azad University, Tehran branch, Tehran, Iran, 2011
[49] A. Amiri Asfarjani, S. Adibnazari, K. Reza Kashyzadeh, ‘Study on the effect of load ratio on the fatigue life of unidirectional composite materials (S-N)’, The First Iranian Aircraft Structural Integrity Program Conference, Sharif University of Technology, Tehran-Iran, 2011
[50] K. reza Kashyzadeh, A. Amiri Asfarjani, ‘Study effect of thickness of galvanized coating on the fatigue endurance limit of the piece’, The First Annual Conference on Mechanical Engineering, Islamic Azad University, Khomeini-Shahr Branch, Isfahan, Iran, 2010
[51] A. Amiri Asfarjani, K. reza Kashyzadeh, ‘Present one way to determine the fatigue life of composite materials (S-N)’, The First Annual Conference on Mechanical Engineering, Islamic Azad University, Khomeini-Shahr Branch, Isfahan, Iran, 2010
[52] K. reza Kashyzadeh, A. Amiri Asfarjani, M. Omidi, ‘Micro-mechanics approach to study fatigue damage of composite materials’, The First Annual Conference on Mechanical Engineering, Islamic Azad University, Khomeini-Shahr Branch, Isfahan, Iran, 2010